Linear systems LINE 50

Linear system

• Made of extruded aluminium stove-enamelled in white.
• The electrical connection is made to push wire terminals.
  The push wire terminals of initial section are included
  in the installation kits. See accesories.
• To achieve the final finish of closing lines, it must be ordered separately the appropiate installation kits to each version. Two final
  covers and initial line plug-in terminals are provided.
• Mounting: Surface/suspended: ICE LINE 2 LED S (see mounting accessories).
  Recessed: ICE LINE 2 LED R by fixing springs included in standard delivery. For plasterboard ceiling thicknesses of 12-13 mm.
  On request other thicknesses available. (See mounting accessories).
• Ceiling cut: ICE LINE 2 LED R: 57 mm width x length
  of sections + 10 m.
• All sections include aligning pieces to form lighting sections in continuous lines. In the case of individual installation it must be
  removed on site.
• Mains voltage: 220-240 V/50-60 Hz. On request: 110-240 V/ 50-60 Hz.
• Corrected power factor 0.95.

• Opal polycarbonate diffuser of high transmittance and ice-effect finish.
• Inner diffuser with BRIGHT LIGHT technology.
• Light source: LED830 / LED840 with a high selection of binning (3 steps) that guarantees the light output emitted and the colour temperature declared.

Linear system

• Made of extruded aluminium stove-enamelled in white.
• The electrical connection is made to push wire terminals. The push wire terminals of initial section are included in the installation
  kits. See accesories.
• To achieve the final finish of closing lines, it must be ordered separately the appropiate installation kits to each version. Two final
  covers and initial line plug-in terminals are provided.
• Mounting: Surface / suspended: ICE LINE 2 LEDS (see mounting accessories).
  Recessed: ICE LINE 2 LED R by fixing springs included in standard delivery. For plasterboard ceiling thicknesses of 12-13 mm.
  On request other thicknesses available. (See mounting accessories).
• Ceiling cut: ICE LINE 2 LED R: 57 mm width x length
  of sections + 10 m.
• All sections include aligning pieces to form lighting sections in continuous lines. In the case of individual installation it must be
  removed on site.
• Mains voltage: 220-240 V/50-60 Hz. On request: 110-240 V/ 50-60 Hz.
• Corrected power factor 0.95

• The new optical technology offers complete light uniformity without light source marks in the diffuser.
• The highly transparent microprismatic structure is formed by a matrix of micro cones with hexagonal base for total glare control. High lumen maintenance and glare limitation: L <1,000 cd/m2
  at 65° from the vertical axis for UGR 19.
• Inner diffuser with BRIGHT LIGHT technology.
• Light source: LED840 with a high selection of binning (3 steps) that guarantees the light output emitted and the colour temperature
  declared.

Linear system

• Made in white stove-enamelled extruded aluminium.
• The electrical connection is made through connectors. Start line
  connectors are Included in the installation kit. See accessories
• To achieve the final finish of the line closure, it must be ordered
  separately the installation kits according to the S or R version. They
  provide two end caps and start line connectors.
• Mounting: Surface/suspended: ICE LINE 2 DYNAMIC S (see
  mounting accessories).
  Recessed: ICE LINE 2 DYNAMIC R, through secured straps included in the supply.
• For plasterboard ceilings of 12-13 mm thickness. For other
  thicknesses on request (see mounting accessories)
• Ceiling cut: ICE LINE 2 DYNAMIC R: 57 mm wide x length sections
  + 10 mm.
• All sections include aligning pieces to form continuous sections of
  light. In case of individual installation, remove on site.
• Main voltage: 220-240 V / 50-60 Hz. F.P. φ = 0,95
• Useful life: L90B10: 70.000 h / L90B50: 100.000 h. Ta: 25ºC

• High-transmittance Opal polycarbonate diffuser with an ice
  effect finish.
• BRIGHT LIGHT technology interior diffuser.
• Asymmetric reflector made of specular aluminum. High
  performance and very good uniformity in lighting vertical
  surfaces like slates or assembly lines.
• Light source: LED DYNAMIC with a higher selection of
  binning (3 steps) with a 2,700-6,500 K temperature range that
  guarantees the emitted light output and the mix of color
  temperatures to recreate daylight in interiors.

Linear system

• Made in white stove-enamelled extruded aluminium.
• The electrical connection is made through connectors. Start line
  connectors are Included in the installation kit. See accessories
• To achieve the final finish of the line closure, it must be ordered
  separately the installation kits according to the S or R version. They
  provide two end caps and start line connectors.
• Mounting: Surface/suspended: ICE LINE 2 DYNAMIC S (see
  mounting accessories).
  Recessed: ICE LINE 2 DYNAMIC R, through secured straps included in the supply.
• For plasterboard ceilings of 12-13 mm thickness. For other
  thicknesses on request (see mounting accessories)
• Ceiling cut: ICE LINE 2 DYNAMIC R: 57 mm wide x length sections
  + 10 mm.
• All sections include aligning pieces to form continuous sections of
  light. In case of individual installation, remove on site.
• Main voltage: 220-240 V / 50-60 Hz. F.P. φ = 0,95
• Useful life: L90B10: 70.000 h / L90B50: 100.000 h. Ta: 25ºC

• The highly transparent microprismatic structure is formed by
  a matrix of micro cones with hexagonal base for total glare
  control. High lumen maintenance and glare limitation: L <
  1.000 cd/m2 at 65º from the vertical axis for UGR19
• BRIGHT LIGHT technology interior diffuser.
• Asymmetric reflector made of specular aluminum. High
  performance and very good uniformity in lighting vertical
  surfaces like slates or assembly lines.
• Light source: LED DYNAMIC with a higher selection of
  binning (3 steps) with a 2,700-6,500 K temperature range that
  guarantees the emitted light output and the mix of color
  temperatures to recreate daylight in interiors.

Linear system

• Made of extruded aluminium stove-enamelled in white.
• The electrical connection is made to push wire terminals.
  The push wire terminals of initial section are included
  in the installation kits. See accesories.
• To achieve the final finish of closing lines, it must be ordered separately the appropiate installation kits to each version. Two final
  covers and initial line plug-in terminals are provided.
• Mounting: Surface/suspended: ICE LINE 2 LED S (see mounting accessories).
  Recessed: ICE LINE 2 LED R by fixing springs included in standard delivery. For plasterboard ceiling thicknesses of 12-13 mm.
  On request other thicknesses available. (See mounting accessories).
• Ceiling cut: ICE LINE 2 LED R: 57 mm width x length of sections + 10 m.
• All sections include aligning pieces to form lighting sections in continuous lines. In the case of individual installation it must be removed on site.
• Mains voltage: 220-240 V/ 50-60 Hz. On request:
  110-240 V/ 50-60 Hz.
• Corrected power factor 0.95.

• Opal polycarbonate diffuser of high transmittance and ice-effect finish.
• Inner diffuser with BRIGHT LIGHT technology.
• Light source: LED830 / LED840 with a high selection of binning (3 steps) that guarantees the light output emitted and the colour temperature declared.

Linear system

• Made of extruded aluminium stove-enamelled in white.
• The electrical connection is made to push wire terminals. The push wire
  terminals of initial section are included in the installation kits. See accesories. 
• To achieve the final finish of closing lines, it must be ordered separately the appropiate installation kits to each version. Two final
  covers and initial line plug-in terminals are provided.
• Mounting: Surface / suspended: ICE LINE 2 LEDS (see mounting accessories).
  Recessed: ICE LINE 2 LED R by fixing springs included in standard delivery. For plasterboard ceiling thicknesses of 12-13 mm. On request other thicknesses available. (See mounting accessories).
• Ceiling cut: ICE LINE 2 LED R: 57 mm width x length
  of sections + 10 m. All sections include aligning pieces to form lighting sections in continuous lines. In the case of individual
  installation it must be removed on site.
• Mains voltage: 220-240 V/ 50-60 Hz. On request: 110-240 V/ 50-60 Hz.
• Corrected power factor 0.95.

• The new optical technology offers complete light uniformity without light source marks in the diffuser.
• The highly transparent microprismatic structure is formed by a matrix of micro cones with hexagonal base for total glare control. High lumen maintenance and glare limitation: L <1,000 cd/m2 at 65° from the vertical axis for UGR 19.
• Inner diffuser with BRIGHT LIGHT technology.
• Light source: LED840 with a high selection of binning (3 steps) that guarantees the light output emitted and the colour temperature
  declared.

Linear system

• Made in white stove-enamelled extruded aluminium.
• The electrical connection is made through connectors. Start line
  connectors are Included in the installation kit. See accessories
• To achieve the final finish of the line closure, it must be ordered
  separately the installation kits according to the S or R version. They
  provide two end caps and start line connectors.
• Mounting: Recessed, through secured straps included in the supply.
• For plasterboard ceilings of 12-13 mm thickness. For other
  thicknesses on request (see mounting accessories)
• Ceiling cut: 57 mm wide x length sections + 10 mm.
• All sections include aligning pieces to form continuous sections of
  light. In case of individual installation, remove on site.
• Main voltage: 220-240 V / 50-60 Hz. F.P. φ = 0,95
• Useful life: L90B10: 70.000 h / L90B50: 100.000 h. Ta: 25ºC

• High-transmittance Opal polycarbonate diffuser with an ice
  effect finish.
• BRIGHT LIGHT technology interior diffuser.
• Asymmetric reflector made of specular aluminum. High
  performance and very good uniformity in lighting vertical
  surfaces like slates or assembly lines.
• 840 LED with a higher selection of binning that guarantees
  the light output emitted and the colour temperature declared,
  as well as a higher color reproduction and white colors with a
  CRI above 80.

Linear system

• Made of extruded aluminium stove-enamelled in white.
• The electrical connection is made to push wire terminals.
  The push wire terminals of initial section are included in the installation kits. See accesories.
• To achieve the final finish of closing lines, it must be ordered separately the appropiate installation kits to each version. Two final
  covers and initial line plug-in terminals are provided.
• Mounting: Surface/suspended: ICE LINE 2 LED S (see mounting accessories). Recessed: ICE LINE 2 LED R by fixing springs included in standard delivery. For plasterboard ceiling
  thicknesses of 12-13 mm. On request other thicknesses
  available. (See mounting accessories).
• Ceiling cut: ICE LINE 2 LED R: 57 mm width x length
  of sections + 10 m.
• All sections include aligning pieces to form lighting sections in continuous lines. In the case of individual
  installation it must be removed on site.
• Mains voltage: 220-240 V/50-60 Hz. On request: 110-240 V/ 50-60 Hz.
• Corrected power factor 0.95.

• Opal polycarbonate diffuser of high transmittance and ice-effect finish. Inner diffuser with BRIGHT LIGHT technology.
• Light source: LED830 / LED840 with a high selection of binning (3 steps) that guarantees the light output emitted and the colour temperature declared.

Linear system

• Made of extruded aluminium stove-enamelled in white.
• The electrical connection is made to push wire terminals. The push wire terminals of initial section are included in the installation kits. See accesories.
• To achieve the final finish of closing lines, it must be ordered  separately the appropiate installation kits to each version. Two final
  covers and initial line plug-in terminals are provided.
• Mounting: Surface / suspended: ICE LINE 2 LEDS (see mounting accessories).
  Recessed: ICE LINE 2 LED R by fixing springs included in standard delivery. For plasterboard ceiling thicknesses of 12-13 mm. On request other thicknesses available. (See mounting accessories).
  Ceiling cut: ICE LINE 2 LED R: 57 mm width x length
  of sections + 10 m.
• All sections include aligning pieces to form lighting sections in continuous lines. In the case of individual installation it must be
  removed on site.
• Mains voltage: 220-240 V/50-60 Hz. On request: 110-240 V/ 50-60 Hz.
• Corrected power factor 0.95.

• The new optical technology offers complete light uniformity without light source marks in the diffuser.
• The highly transparent microprismatic structure is formed by a matrix of micro cones with hexagonal base for total glare control. High lumen maintenance and glare limitation: L <1,000 cd/m2
  at 65° from the vertical axis for UGR 19.
  Inner diffuser with BRIGHT LIGHT technology.
• Light source: LED840 with a high selection of binning (3 steps) that guarantees the light output emitted and the colour temperature
  declared.

Linear system

• Made in white stove-enamelled extruded aluminium.
• The electrical connection is made through connectors. Start line
  connectors are Included in the installation kit. See accessories
• To achieve the final finish of the line closure, it must be ordered
  separately the installation kits according to the S or R version. They
  provide two end caps and start line connectors.
• Mounting: Surface/suspended: ICE LINE 2 DYNAMIC S (see
  mounting accessories). Recessed: ICE LINE 2 DYNAMIC R,
  through secured straps included in the supply.
• For plasterboard ceilings of 12-13 mm thickness. For other
  thicknesses on request (see mounting accessories)
• Ceiling cut: ICE LINE 2 DYNAMIC R: 57 mm wide x length sections
  + 10 mm.
• All sections include aligning pieces to form continuous sections of
  light. In case of individual installation, remove on site.
• Main voltage: 220-240 V / 50-60 Hz. F.P. φ = 0,95
• Useful life: L90B10: 70.000 h / L90B50: 100.000 h. Ta: 25ºC

• High-transmittance Opal polycarbonate diffuser with an ice
  effect finish.
• BRIGHT LIGHT technology interior diffuser.
• Asymmetric reflector made of specular aluminum. High
  performance and very good uniformity in lighting vertical
  surfaces like slates or assembly lines.
• Light source: LED DYNAMIC with a higher selection of
  binning (3 steps) with a 2,700-6,500 K temperature range that
  guarantees the emitted light output and the mix of color
  temperatures to recreate daylight in interiors.

Linear system

• Made in white stove-enamelled extruded aluminium.
• The electrical connection is made through connectors. Start line
  connectors are Included in the installation kit. See accessories
• To achieve the final finish of the line closure, it must be ordered
  separately the installation kits according to the S or R version. They
  provide two end caps and start line connectors.
• Mounting: Surface/suspended: ICE LINE 2 DYNAMIC S (see
  mounting accessories). Recessed: ICE LINE 2 DYNAMIC R,
  through secured straps included in the supply.
• For plasterboard ceilings of 12-13 mm thickness. For other
  thicknesses on request (see mounting accessories)
• Ceiling cut: ICE LINE 2 DYNAMIC R: 57 mm wide x length sections
  + 10 mm.
• All sections include aligning pieces to form continuous sections of
  light. In case of individual installation, remove on site.
• Main voltage: 220-240 V / 50-60 Hz. F.P. φ = 0,95
• Useful life: L90B10: 70.000 h / L90B50: 100.000 h. Ta: 25ºC

• The highly transparent microprismatic structure is formed by
  a matrix of micro cones with hexagonal base for total glare
  control. High lumen maintenance and glare limitation: L <
  1.000 cd/m2 at 65º from the vertical axis for UGR19
• BRIGHT LIGHT technology interior diffuser.
• Asymmetric reflector made of specular aluminum. High
  performance and very good uniformity in lighting vertical
  surfaces like slates or assembly lines.
• Light source: LED DYNAMIC with a higher selection of
  binning (3 steps) with a 2,700-6,500 K temperature range that
  guarantees the emitted light output and the mix of color
  temperatures to recreate daylight in interiors.

Linear system

• Made of extruded aluminium stove-enamelled in white.
• The electrical connection is made to push wire terminals. The push wire terminals of initial section are included in the installation kits. See accesories.
• To achieve the final finish of closing lines, it must be ordered separately the appropiate installation kits to each version. Two final
  covers and initial line plug-in terminals are provided.
• Surface-mounted or suspended luminaire for installation in a continuous row or individually. See mounting accesories.
• All sections include aligning pieces to form lighting sections in continuous lines. In the case of individual installation it must be
  removed on site.
• Mains voltage: 220-240 V/50-60 Hz. On request: 110-240 V/ 50-60 Hz.
• Corrected power factor: 0.95.

DIRECT LIGHTING

• Opal version: opalized polycarbonate diffuser of high transmittance and ice-effect finish.
• Micro version: The highly transparent microprismatic structure is formed by a matrix of micro cones with hexagonal base for
  total glare control. High lumen maintenance and glare
  limitation: L <1,000 cd/m2 at 65° from the vertical axis for UGR 19.

INDIRECT LIGHTING

• In both versions with opal optics of high transmittance.
  
• Inner diffuser with BRIGHT LIGHT technology.
  
• Light source: LED840 with a high selection of binning (3 steps) that guarantees the light output emitted and the colour temperature declared.

Linear system

• Made in white stove-enamelled extruded aluminium.
• The electrical connection is made through connectors. Start
  line connectors are Included in the installation kit. See accessories
• To achieve the final finish of the line closure, it must be ordered separately the installation kits according to the S or R version. They provide two end caps and start line connectors.
• Mounting: Surface/suspended: ICE LINE 90º S (see mounting accessories). Recessed: ICE LINE 90º R, through secured straps included in the supply.
• For plasterboard ceilings of 12-13 mm thickness. For other thicknesses on request (see mounting accessories)
• Ceiling cut: ICE LINE 90º R: 57 mm wide x length sections
  + 10 mm. (for individual installation)
• All sections include aligning pieces to form continuous sections of light. In case of individual installation, remove on site.
• Main voltage: 220-240 V / 50-60 Hz. F.P. φ = 0,95
• Useful life: L90B10: 70.000 h / L90B50: 100.000 h.
  Ta: 25ºC

• High-transmittance Opal polycarbonate diffuser with an ice effect finish.
• BRIGHT LIGHT technology interior diffuser.
• Asymmetric reflector made of specular aluminum. High performance and very good uniformity in lighting vertical surfaces like slates or assembly lines.
• 830/840 LED with a higher selection of binning that guarantees the light output emitted and the colour temperature declared, as well as a higher color reproduction and white colors with a CRI above 80.
• 85 lm / W that guarantee the same light intensity that the rest of family.

Linear system

• Made in white stove-enamelled extruded aluminium.
• The electrical connection is made through connectors. Start
  line connectors are Included in the installation kit. See
  accessories
• To achieve the final finish of the line closure, it must be
  ordered separately the installation kits according to the S
  or R version. They provide two end caps and start line
  connectors.
• Mounting: surface/suspended: ICE LINE 90º S (see
  mounting accessories). Recessed: ICE LINE 90º R,
  through secured straps included in the supply.
• For plasterboard ceilings of 12-13 mm thickness. For other
  thicknesses on request (see mounting accessories)
• Ceiling cut: ICE LINE 90º R: 57 mm wide x length sections
  + 10 mm. (for individual installation)
• All sections include aligning pieces to form continuous
  sections of light. In case of individual installation, remove on
  site.
• Main voltage: 220-240 V / 50-60 Hz. F.P. φ = 0,95
• Useful life: L90B10: 70.000 h / L90B50: 100.000 h.
  Ta: 25ºC

• High-transmittance Opal polycarbonate diffuser with an ice effect finish.
• BRIGHT LIGHT technology interior diffuser.
• Asymmetric reflector made of specular aluminum. High performance and very good uniformity in lighting vertical surfaces like slates or assembly lines.
• 830/840 LED with a higher selection of binning that guarantees the light output emitted and the colour temperature declared, as well as a higher color reproduction and white colors with a CRI above 80.
• 85 lm / W that guarantee the same light intensity that the rest of family.

Linear system

• Made in white stove-enamelled extruded aluminium.
• The electrical connection is made through connectors. Start line
  connectors are Included in the installation kit. See accessories
• To achieve the final finish of the line closure, it must be ordered
  separately the installation kits according to the S or R version. They
  provide two end caps and start line connectors.
• Mounting: Surface/suspended (see mounting accessories). 
• All sections include aligning pieces to form continuous sections of
  light. In case of individual installation, remove on site.
• Main voltage: 220-240 V / 50-60 Hz. F.P. φ = 0,95
• Useful life: L90B10: 70.000 h / L90B50: 100.000 h. Ta: 25ºC

• High-transmittance Opal polycarbonate diffuser with an ice
  effect finish.
• BRIGHT LIGHT technology interior diffuser.
• Asymmetric reflector made of specular aluminum. High
  performance and very good uniformity in lighting vertical
  surfaces like slates or assembly lines.
• 840 LED with a higher selection of binning that guarantees
  the light output emitted and the colour temperature declared,
  as well as a higher color reproduction and white colors with a
  CRI above 80.

Sistema lineal

• Cuerpo en aluminio de extrusión acabado anodizado con altas prestaciones de disipación.
• Luminaria completa y lista para instalar y conectar sin necesidad de herramientas.
• Montaje: empotrado, mediante muelles de sujeción incluidos en el suministro.
• Para espesor de techo pladur 12-13 mm. Para otros espesores, previa solicitud.
• Corte en el techo: 20 mm de ancho x longitud de los tramos + 2 mm.
• El diseño eléctrico del sistema facilita la alimentación de varias luminarias con una sola fuente de alimentación.
• La toma de corriente inicial se debe realizar con cableado de 0,75 mm2, permitiendo una distancia máxima entre la fuente de alimentación y la primera luminaria de 12 m.
• Alimentación DC 48V. Ver accesorios para equipo eléctrico remoto.
• Tramos para crear líneas continuas.
• Los tramos inicio y final llevan incorporadas las tapas.
• El tramo inicio lleva el cable de alimentación de bajo voltaje incorporado.

• Celosía con acabado negro mate.
• Gracias a la instalación de la celosía negra mate se consigue un control de deslumbramiento para conseguir un UGR<19, según condiciones del proyecto.
• Fuente de luz LED 830/840, con un rendimiento de 16W/m con alta selección de binning que garantiza el flujo emitido y la temperatura de color declarada, así como una alta reproducción cromática de color y blancos, con un CRI superior a 80.
• Posibilidad de incorporar HCL bajo pedido.

Sistema lineal

• Cuerpo en aluminio de extrusión acabado anodizado con altas prestaciones de disipación.
• Luminaria completa y lista para instalar y conectar sin necesidad de herramientas.
• Montaje: empotrado, mediante muelles de sujeción incluidos en el suministro.
• Para espesor de techo pladur 12-13 mm. Para otros espesores, previa solicitud.
• Corte en el techo: 20 mm de ancho x longitud de los tramos + 2 mm.
• El diseño eléctrico del sistema facilita la alimentación de varias luminarias con una sola fuente de alimentación.
• La toma de corriente inicial se debe realizar con cableado de 0,75 mm2, permitiendo una distancia máxima entre la fuente de alimentación y la primera luminaria de 12 m.
• Alimentación DC 48V. Ver accesorios para equipo eléctrico remoto.
• Tramos para crear líneas continuas.
• Los tramos inicio y final llevan incorporadas las tapas.
• El tramo inicio lleva el cable de alimentación de bajo voltaje incorporado.

• Celosía con acabado blanco mate.
• Gracias a la instalación de la celosía blanco mate se consigue un control de deslumbramiento para conseguir un UGR<19, según condiciones del proyecto.
• Fuente de luz LED 830/840, con un rendimiento de 16W/m con alta selección de binning que garantiza el flujo emitido y la temperatura de color declarada, así como una alta reproducción cromática de color y blancos, con un CRI superior a 80.
• Posibilidad de incorporar HCL bajo pedido.

Sistema lineal

• Cuerpo en aluminio de extrusión acabado anodizado con altas prestaciones de disipación.
• Luminaria completa y lista para instalar y conectar sin necesidad de herramientas.
• Montaje: empotrado, mediante muelles de sujeción incluidos en el suministro.
• Para espesor de techo pladur 12-13 mm. Para otros espesores, previa solicitud.
• Corte en el techo: 20 mm de ancho x longitud de los tramos + 2 mm.
• El diseño eléctrico del sistema facilita la alimentación de varias luminarias con una sola fuente de alimentación.
• La toma de corriente inicial se debe realizar con cableado de 0,75 mm2, permitiendo una distancia máxima entre la fuente de alimentación y la primera luminaria de 12 m.
• Alimentación DC 48V. Ver accesorios para equipo eléctrico remoto.
• Tramos para crear líneas continuas.
• Los tramos inicio y final llevan incorporadas las tapas.
• El tramo inicio lleva el cable de alimentación de bajo voltaje incorporado.

• Difusor de policarbonato Opal de alta transmitancia con acabado efecto hielo.
• Gracias al difusor instalado se consigue evitar el marcado de los puntos de luz.
• Fuente de luz LED 830/840, con un rendimiento de 16W/m con alta selección de binning que garantiza el flujo emitido y la temperatura de color declarada, así como una alta reproducción cromática de color y blancos, con un CRI superior a 80.
• Posibilidad de incorporar HCL bajo pedido.

Linear system

• Made in white stove-enamelled extruded aluminium.
• Mounting: Wall installation.
• Mounting accessories are not included.
• Main voltage: 220-240 V / 50-60 Hz.
  F.P. φ = 0,95
• Useful life: L90B10: 70.000 h / L90B50: 100.000 h. Ta: 25ºC

• High-transmittance Opal polycarbonate diffuser with an ice effect finish.
• BRIGHT LIGHT technology interior diffuser.
• Asymmetric reflector made of specular aluminum. High performance and very good uniformity in lighting vertical
  surfaces like slates or assembly lines.
• 830/840 LED with a higher selection of binning that guarantees the light output emitted and the colour temperature declared, as well as a higher color reproduction and white colors with a CRI above 80.