Architectural Luminaire LED ONIX IP65

Universes of light to scene.

Architectural luminaire ONIX

Universe of light on stage

ONIX offers the technological solution for our architecture to stand out as it deserves. It is the perfect tool that combines aesthetics, dynamic light and integration.
Graduated head joint with mounting accessories for up to 110 ° orientation. ONIX allows installation in wall, ceiling and floor.

365 days of identity in our environment

ONIX incorpores GORETM technology, that compensates the differences in pressure and guarantees its high level of protection.
ONIX

Complete ONIX family

Start / intermediate section

Spot

Elliptical

End of line / individual section

Spot

Elliptical

References

The Calderones Hotel Suites is renewed

Related products

Lledó Space Concept

SPACE CONCEPT is the only integrated energy efficiency solution in the market

Lledó Space Concept
Tamaño

S, M, L

Color

Blanco Mate, Negro Oxirón

Tipo de Instalación

Carril electrificado trifásico, Adosado a techo, Suspendido en techo, Empotrado en techo

Apertura del Haz

Super intensivo, Intensivo, Extensivo, Super extensivo

Potencia

<30W, <40W, <50W

Temperatura de color

3.000K, 4.000K

Reproducción cromática

CRI 90, CRI 95

Flujo luminoso

>1.800lm, > 2.500lm, >3.000lm

Previous Next
Close
Test Caption
Test Description goes like this

Product details

Spot

ONIX LED · IP65 · Initial / intermediate section

Luminaire body

Optics

  • Made of extruded aluminium with matt anodised finish and semi-crystalline thermoplastic with high mechanical performances in black color.
  • Mains voltage: 220-240 V/50-60 Hz.
  • Adjustable joint in the header using the mounting accessories for an orientation of up to 110°.
  • Installation: Outdoor (on request indoor) by mounting accessories (ordered separately). Thanks to the anchoring system with adjustable orientation, ONIX can be installed in wall, ceiling and floor. For those installations on the ceiling and on the ground where the orientation of the light is not required, there are available specific stainless steel brackets.
  • The electrical connection and the control is performed externally through malefemale connectors IP65 (please order separately).
    The luminaire includes preinstalled 0.5 m cable for both DALI/DMX signal as power supply/wiring to prevent opening on site and to ensure from factory its ingress protection rating.
  • The RGB/DALI version has independent power supply and control line wiring. Initial/intermediate version incorporates wiring.
  • Electronic equipment for DALI or DMX 512RDM for regulating the system without opening the luminaire on site.
  • ONIX incorporates GORETM technology that compensates for differences in pressure, ensuring high levels of protection.
  • NTC thermal protection system of the light source.
  • PMMA Lenses of high transmittance optimised to the application. Available in narrow beam 12° (Spot) for lighting elements at great heights, and elliptical 12°x46° (Elliptical) for sweeps of facades or general lighting.
  • Light source: LED840 with a high selection of binning (3 steps) that guarantees the light output emitted and the colour temperature declared. RGB LED with wavelenght in red (610 nm), green (540 nm) and blue (480 nm).

 

VERSIONS & DOWNLOADS

Dimmable DALI Dimmable DMX Light source Light distribution Power Colour temp. CRI Luminous flux Weight Datasheet Assembly BIM Revit Photometric ULD Photometric LDT Photometric IES CAD
4810180002108 On request LED840 SPOT 43W 4,000k 82 2,525lm 2Kg
4820360002108 On request LED840 SPOT 83W 4,000k 82 5,050lm 4Kg
On request 4810180007100 LEDRGB SPOT 43W RGB 2Kg
On request 4820360007100 LEDRGB SPOT 83W RGB 4Kg

Product details

Elliptical

ONIX LED · IP65 · Initial / intermediate section

Luminaire body

Optics

  • Made of extruded aluminium with matt anodised finish and semi-crystalline thermoplastic with high mechanical performances in black color.
  • Mains voltage: 220-240 V/50-60 Hz.
  • Adjustable joint in the header using the mounting accessories for an orientation of up to 110°.
  • Installation: Outdoor (on request indoor) by mounting accessories (ordered separately). Thanks to the anchoring system with adjustable orientation, ONIX can be installed in wall, ceiling and floor. For those installations on the ceiling and on the ground where the orientation of the light is not required, there are available specific stainless steel brackets.
  • The electrical connection and the control is performed externally through malefemale connectors IP65 (please order separately).
    The luminaire includes preinstalled 0.5 m cable for both DALI/DMX signal as power supply/wiring to prevent opening on site and to ensure from factory its ingress protection rating.
  • The RGB/DALI version has independent power supply and control line wiring. Initial/intermediate version incorporates wiring.
  • Electronic equipment for DALI or DMX 512RDM for regulating the system without opening the luminaire on site.
  • ONIX incorporates GORETM technology that compensates for differences in pressure, ensuring high levels of protection.
  • NTC thermal protection system of the light source.
  • PMMA Lenses of high transmittance optimised to the application. Available in narrow beam 12° (Spot) for lighting elements at great heights, and elliptical 12°x46° (Elliptical) for sweeps of facades or general lighting.
  • Light source: LED840 with a high selection of binning (3 steps) that guarantees the light output emitted and the colour temperature declared. RGB LED with wavelenght in red (610 nm), green (540 nm) and blue (480 nm).

 

VERSIONS & DOWNLOADS

Dimmable DALI Dimmable DMX Light source Light distribution Power Colour temp. CRI Luminous flux Weight Datasheet Assembly BIM Revit Photometric ULD Photometric LDT Photometric IES CAD
4815180002A08 On request LED840 ELLIPTICAL 43W 4,000k 82 2,190lm 2Kg
4825360002A08 On request LED840 ELLIPTICAL 83W 4,000k 82 4,380lm 4Kg
On request 4815180007A00 LEDRGB ELLIPTICAL 43W RGB 2Kg
On request 4825360007A00 LEDRGB ELLIPTICAL 83W RGB 4Kg

Product details

Spot

ONIX LED · IP65 · End of line / individual section

Luminaire body

Optics

  • Made of extruded aluminium with matt anodised finish and semi-crystalline thermoplastic with high mechanical performances in black color.
  • Mains voltage: 220-240 V/50-60 Hz.
  • Adjustable joint in the header using the mounting accessories for an orientation of up to 110°.
  • Installation: Outdoor (on request indoor) by mounting accessories (ordered separately). Thanks to the anchoring system with adjustable orientation, ONIX can be installed in wall, ceiling and floor. For those installations on the ceiling and on the ground where the orientation of the light is not required, there are available specific stainless steel brackets.
  • The electrical connection and the control is performed externally through malefemale connectors IP65 (please order separately).
    The luminaire includes preinstalled 0.5 m cable for both DALI/DMX signal as power supply/wiring to prevent opening on site and to ensure from factory its ingress protection rating.
  • The RGB/DALI version has independent power supply and control line wiring. Initial/intermediate version incorporates wiring.
  • Electronic equipment for DALI or DMX 512RDM for regulating the system without opening the luminaire on site.
  • ONIX incorporates GORETM technology that compensates for differences in pressure, ensuring high levels of protection.
  • NTC thermal protection system of the light source.
  • PMMA Lenses of high transmittance optimised to the application. Available in narrow beam 12° (Spot) for lighting elements at great heights, and elliptical 12°x46° (Elliptical) for sweeps of facades or general lighting.
  • Light source: LED840 with a high selection of binning (3 steps) that guarantees the light output emitted and the colour temperature declared. RGB LED with wavelenght in red (610 nm), green (540 nm) and blue (480 nm).

 

VERSIONS & DOWNLOADS

DALI adjustable DMX adjustable Light source Light opening Power Color temp. CRI Luminous flux Weight Datasheet Assembly BIM Revit Send to DIALux Photometric ULD Photometric LDT Photometric IES CAD
4815180002108 Bajo pedido LED840 SPOT 43W 4.000k 82 2.525lm 2Kg
4825360002108 Bajo pedido LED840 SPOT 83W 4.000k 82 5.050lm 4Kg
Bajo pedido 4815180007100 LEDRGB SPOT 43W RGB 2Kg
Bajo pedido 4825360007100 LEDRGB SPOT 83W RGB 4Kg

Product details

Elliptical

ONIX LED · IP65 · End of line / individual section

Luminaire body

Optics

  • Made of extruded aluminium with matt anodised finish and semi-crystalline thermoplastic with high mechanical performances in black color.
  • Mains voltage: 220-240 V/50-60 Hz.
  • Adjustable joint in the header using the mounting accessories for an orientation of up to 110°.
  • Installation: Outdoor (on request indoor) by mounting accessories (ordered separately). Thanks to the anchoring system with adjustable orientation, ONIX can be installed in wall, ceiling and floor. For those installations on the ceiling and on the ground where the orientation of the light is not required, there are available specific stainless steel brackets.
  • The electrical connection and the control is performed externally through malefemale connectors IP65 (please order separately).
    The luminaire includes preinstalled 0.5 m cable for both DALI/DMX signal as power supply/wiring to prevent opening on site and to ensure from factory its ingress protection rating.
  • The RGB/DALI version has independent power supply and control line wiring. Initial/intermediate version incorporates wiring.
  • Electronic equipment for DALI or DMX 512RDM for regulating the system without opening the luminaire on site.
  • ONIX incorporates GORETM technology that compensates for differences in pressure, ensuring high levels of protection.
  • NTC thermal protection system of the light source.
  • PMMA Lenses of high transmittance optimised to the application. Available in narrow beam 12° (Spot) for lighting elements at great heights, and elliptical 12°x46° (Elliptical) for sweeps of facades or general lighting.
  • Light source: LED840 with a high selection of binning (3 steps) that guarantees the light output emitted and the colour temperature declared. RGB LED with wavelenght in red (610 nm), green (540 nm) and blue (480 nm).

 

VERSIONS & DOWNLOADS

DALI adjustable DMX adjustable Light source Light opening Power Color temp. CRI Luminous flux Weight Datasheet Assembly BIM Revit Send to DIALux Photometric ULD Photometric LDT Photometric IES CAD
4815180002A08 Bajo pedido LED840 ELÍPTICO 43W 4.000k 82 2.190lm 2Kg
4825360002A08 Bajo pedido LED840 ELÍPTICO 83W 4.000k 82 4.380lm 4Kg
Bajo pedido 4815180007A00 LEDRGB ELÍPTICO 43W RGB 2Kg
Bajo pedido 4825360007A00 LEDRGB ELÍPTICO 83W RGB 4Kg